AshScan Fossil Fueled
The AshScan Low Energy Transmission (LET) analyser combines state-of-the-art nuclear technology with ground-breaking modelling and powerful statistical analysis. Installed on a conveyor belt, the AshScan delivers accurate, minute-by-minute data on percentage ash content present in the coal feed to the kiln.
AshScan in the coal fired power generation Industry
The AshScan Online Coal Analyzer provides realtime, continuous data on total ash content in coal. Using DUET (duel energy transmission) technology, also known as LET (low energy transmission), the AshScan is a tried and proven performer suitable for most coal types.Ash consists mainly of oxides of Silicon (Si), Iron (Fe), Aluminium (Al) and Calcium (Ca). The AshScan measures the combined total of these elements which directly correlates to the total ash content in coal.The DUET technique uses two radioactive sources; Am-241 and Cs-137. Am-241 is a low energy gamma radiation. Absorption of Am-241 gamma rays occurs due to the presence of Si, Fe, Al and Ca, and the amount of coal on the conveyor. Cs-137 is a high energy gamma radiation. Absorption of Cs-137 gamma rays is due only to the amount of coal on the conveyor. This allows the Am-241 measurement to be normalised for bed depth. The normalised Am-241 absorption is then correlated to total Ash content by calibrating against laboratory reported ash sample results.The AshScan is suitable for both raw coal and washed coal where ash chemistry is relatively stable and where the bed depth of the coal does not exceed 350mm.Its practical design incorporates many unique features not available in other through belt ash gauges. The AshScan on-belt coal analyser’s modern electronics, communications and human machine interface makes set-up, calibration and ongoing verification of accuracy simple and straightforward.The AshScan is commonly used in the coal and power industries for:
- Monitoring and correction of received coal
- Stocpile building to a redetermined quality requirement
- Consistent quality feed to boiler bunkers
- Improved boiler operations
- Increased boiler efficiency
AshScan DUO operating principle.
The AshScan utilises two radioactive sources. The technology is referred to as Dual Energy Transmission (DET) or Low Energy Transmission (LET).
LET analysers uses a Am-241 source which transmits “soft X-rays” at 60keV, which measures the density/atomic number of the ash forming elements within the coal. The higher the Ash content, the less 60keV rays will reach the detector. The second source Cs-137 transmits higher energy gamma rays at 660keV, which measures the bulk density of the coal and compensates for the bulk density and bed depth variations. If the Fe and Ca varies significantly within the coal, it will affect the accuracy of this analyser and introduce a shift in the calibration. E.g. wash plant receiving coal from 2 or 3 different mines with different Fe & Ca content. The analyser can store up to 16 different calibrations for different coal types, but it needs an input to know which coal is being feed at any given time, e.g. Coal from Mine A or B, etc. Accuracy is approx. 0.9 -1%
The AshScan has proprietary counting electronics, which is the fastest available on the market. The measurement and output has the fastest update time of less than 25 seconds
Value & Benefits
The AshScan provides real time analysis of ash and moisture content in coal that is used to improve monitoring, sorting and blending operations in:
- Processing Plants
- Coal Fired Power Stations
AshScan is used for the applications of Raw Coal in mining, Plant Feed control, Stockpile building and Blending of coal to meet stringent quality requirements.
The AshScan is the most affordable, accurate and easy-to-install cross belt analyser analyser of its kind in the world today.
Combining state-of-the-art nuclear technology (LET) the AshScan delivers accurate, minute by minute ash content analysis and reporting of Key Process Parameters such as:
- Direct calorific value
- Co2 emissions factor
- Base/Acid ratio
- Fouling Index
- Slagging Index
- Ash Fusion Temperature
- Moisture content